Solidity compiler

Configuration related to the behavior of the Solidity compiler.

Sections

General

Configuration related to the behavior of the Solidity compiler.

remappings
  • Type: array of strings (remappings)
  • Default: none
  • Environment: FOUNDRY_REMAPPINGS or DAPP_REMAPPINGS

An array of remappings in the following format: <name>=<target>.

A remapping remaps Solidity imports to different directories. For example, the following remapping

@openzeppelin/=node_modules/@openzeppelin/openzeppelin-contracts/

with an import like

import "@openzeppelin/contracts/utils/Context.sol";

becomes

import "node_modules/@openzeppelin/openzeppelin-contracts/contracts/utils/Context.sol";
auto_detect_remappings
  • Type: boolean
  • Default: true
  • Environment: FOUNDRY_AUTO_DETECT_REMAPPINGS or DAPP_AUTO_DETECT_REMAPPINGS

If enabled, Foundry will automatically try auto-detect remappings by scanning the libs folder(s).

If set to false, only the remappings in foundry.toml and remappings.txt are used.

allow_paths
  • Type: array of strings (paths)
  • Default: none
  • Environment: FOUNDRY_ALLOW_PATHS or DAPP_ALLOW_PATHS

Tells solc to allow reading source files from additional directories. This is mainly relevant for complex workspaces managed by pnpm or similar.

See also solc allowed-paths

include_paths
  • Type: array of strings (paths)
  • Default: none
  • Environment: FOUNDRY_INCLUDE_PATHS or DAPP_INCLUDE_PATHS

Make an additional source directory available to the default import callback. Use this option if you want to import contracts whose location is not fixed in relation to your main source tree, e.g. third-party libraries installed using a package manager. Can be used multiple times. Can only be used if base path has a non-empty value.

See also solc path resolution

libraries
  • Type: array of strings (libraries)
  • Default: none
  • Environment: FOUNDRY_LIBRARIES or DAPP_LIBRARIES

An array of libraries to link against in the following format: <file>:<lib>:<address>, for example: src/MyLibrary.sol:MyLibrary:0xfD88CeE74f7D78697775aBDAE53f9Da1559728E4.

solc_version
  • Type: string (semver)
  • Default: none
  • Environment: FOUNDRY_SOLC_VERSION or DAPP_SOLC_VERSION

If specified, overrides the auto-detection system (more below) and uses a single Solidity compiler version for the project.

Only strict versions are supported (i.e. 0.8.11 is valid, but ^0.8.0 is not).

auto_detect_solc
  • Type: boolean
  • Default: true
  • Environment: FOUNDRY_AUTO_DETECT_SOLC or DAPP_AUTO_DETECT_SOLC

If enabled, Foundry will automatically try to resolve appropriate Solidity compiler versions to compile your project.

This key is ignored if solc_version is set.

offline
  • Type: boolean
  • Default: false
  • Environment: FOUNDRY_OFFLINE or DAPP_OFFLINE

If enabled, Foundry will not attempt to download any missing solc versions.

If both offline and auto-detect-solc are set to true, the required version(s) of solc will be auto detected but any missing versions will not be installed.

ignored_warnings_from
  • Type: array of strings (file paths)
  • Default: none
  • Environment: FOUNDRY_IGNORED_WARNINGS_FROM OR DAPP_IGNORED_WARNINGS_FROM

An array of file paths from which warnings should be ignored during the compulation process. This is useful when you have a specific directories of files that produce known warning and you wish to suppress these warnings without affecting others.

Each entry in the array should be a path to a directory or a specific file. For Example:

ignored_warnings_from = ["path/to/warnings/file1.sol", "path/to/warnings/file2.sol"]

This configuration will cause the compiler to ignore any warnings that originate from the specified paths.

ignored_error_codes
  • Type: array of integers/strings
  • Default: none for source, SPDX license identifiers and contract size for tests
  • Environment: FOUNDRY_IGNORED_ERROR_CODES or DAPP_IGNORED_ERROR_CODES

An array of Solidity compiler error codes to ignore during build, such as warnings.

Valid values are:

  • license: 1878
  • code-size: 5574
  • func-mutability: 2018
  • unused-var: 2072
  • unused-param: 5667
  • unused-return: 9302
  • virtual-interfaces: 5815
  • missing-receive-ether: 3628
  • shadowing: 2519
  • same-varname: 8760
  • unnamed-return: 6321
  • unreachable: 5740
  • pragma-solidity: 3420
  • constructor-visibility: 2462
  • init-code-size: 3860
  • transient-storage: 2394
  • too-many-warnings: 4591
deny_warnings
  • Type: boolean
  • Default: false
  • Environment: FOUNDRY_DENY_WARNINGS or DAPP_DENY_WARNINGS

If enabled, Foundry will treat Solidity compiler warnings as errors, stopping artifacts from being written to disk.

evm_version
  • Type: string
  • Default: paris
  • Environment: FOUNDRY_EVM_VERSION or DAPP_EVM_VERSION

The EVM version to use during tests. The value must be an EVM hardfork name, such as london, byzantium, etc.

revert_strings
  • Type: string
  • Default: default
  • Environment: FOUNDRY_REVERT_STRINGS or DAPP_REVERT_STRINGS

Possible values are:

  • default does not inject compiler-generated revert strings and keeps user-supplied ones.
  • strip removes all revert strings (if possible, i.e. if literals are used) keeping side-effects.
  • debug injects strings for compiler-generated internal reverts, implemented for ABI encoders V1 and V2 for now.
  • verboseDebug even appends further information to user-supplied revert strings (not yet implemented).
extra_output_files
  • Type: array of strings
  • Default: none
  • Environment: N/A

Extra output from the Solidity compiler that should be written to files in the artifacts directory.

Valid values are:

  • metadata: Written as a metadata.json file in the artifacts directory
  • ir: Written as a .ir file in the artifacts directory
  • irOptimized: Written as a .iropt file in the artifacts directory
  • ewasm: Written as a .ewasm file in the artifacts directory
  • evm.assembly: Written as a .asm file in the artifacts directory
extra_output
  • Type: array of strings
  • Default: see below
  • Environment: N/A

Extra output to include in the contract’s artifact.

The following values are always set, since they’re required by Forge:

extra_output = [
  "abi",
  "evm.bytecode",
  "evm.deployedBytecode",
  "evm.methodIdentifiers",
]

For a list of valid values, see the [Solidity docs][output-desc].

bytecode_hash
  • Type: string
  • Default: ipfs
  • Environment: FOUNDRY_BYTECODE_HASH or DAPP_BYTECODE_HASH

Determines the hash method for the metadata hash that is appended to the bytecode.

Valid values are:

  • ipfs (default)
  • bzzr1
  • none
sparse_mode
  • Type: boolean
  • Default: false
  • Environment: FOUNDRY_SPARSE_MODE or DAPP_SPARSE_MODE

Enables sparse mode for builds.

Optimizer

Configuration related to the Solidity optimizer.

optimizer
  • Type: boolean
  • Default: true
  • Environment: FOUNDRY_OPTIMIZER or DAPP_OPTIMIZER

Whether or not to enable the Solidity optimizer.

optimizer_runs
  • Type: integer
  • Default: 200
  • Environment: FOUNDRY_OPTIMIZER_RUNS or DAPP_OPTIMIZER_RUNS

The amount of optimizer runs to perform.

via_ir
  • Type: boolean
  • Default: false
  • Environment: FOUNDRY_VIA_IR or DAPP_VIA_IR

If set to true, changes compilation pipeline to go through the new IR optimizer.

use_literal_content
  • Type: boolean
  • Default: false

If set to true, changes compilation to only use literal content and not URLs.

[optimizer_details]

The optimizer details section is used to tweak how the Solidity optimizer behaves. There are several configurable values in this section (each of them are booleans):

  • peephole
  • inliner
  • jumpdestRemover
  • orderLiterals
  • deduplicate
  • cse
  • constantOptimizer
  • yul

Refer to the Solidity compiler input description for the default values.

[optimizer_details.yul_details]

The Yul details subsection of the optimizer details section is used to tweak how the new IR optimizer behaves. There are two configuration values:

  • stack_allocation: Tries to improve the allocation of stack slots by freeing them up earlier.
  • optimizer_steps: Selects the optimizer steps to be applied.

Refer to the Solidity compiler input description for the default values.

ℹ️ Note If you encounter compiler errors when using via_ir, explicitly enable the legacy optimizer and leave optimizer_steps as an empty string

Model checker

The Solidity model checker is a built-in opt-in module that is available in Solidity compilers for OSX and Linux. Learn more about the model checker in the Solidity compiler documentation

ℹ️ Note The model checker requires z3 version 4.8.8 or 4.8.14 on Linux.

The model checker settings are configured in the [model_checker] section of the configuration.

The model checker will run when forge build is invoked, and any findings will show up as warnings.

These are the recommended settings when using the model checker:

[profile.default.model_checker]
contracts = {'/path/to/project/src/Contract.sol' = ['Contract']}
engine = 'chc'
timeout = 10000
targets = ['assert']

Setting which contract should be verified is extremely important, otherwise all available contracts will be verified which may take a long time.

The recommended engine is chc, but bmc and all (which runs both) are also accepted.

It is also important to set a proper timeout (given in milliseconds), since the default time given to the underlying solver may not be enough.

If no verification targets are given, only assertions will be checked.

[model_checker]

The following keys are available in the model checker section.

model_checker.contracts
  • Type: table
  • Default: all
  • Environment: N/A

Specifies what contracts the model checker will analyze.

The key of the table is the path to a source file, and the value is an array of contract names to check.

For example:

[profile.default.model_checker]
contracts = { "src/MyContracts.sol" = ["ContractA", "ContractB"] }
model_checker.div_mod_with_slacks
  • Type: boolean
  • Default: false
  • Environment: N/A

Sets how division and modulo operations should be encoded.

Refer to the Solidity documentation for more information.

model_checker.engine
  • Type: string (see below)
  • Default: all
  • Environment: N/A

Specifies the model checker engine to run. Valid values are:

  • chc: The constrained horn clauses engine
  • bmc: The bounded model checker engine
  • all: Runs both engines

Refer to the Solidity documentation for more information on the engines.

model_checker.invariants
  • Type: array of strings
  • Default: N/A
  • Environment: N/A

Sets the model checker invariants. Valid values are:

  • contract: Contract Invariants
  • reentrancy: Reentrancy Properties

Refer to the Solidity documentation for more information on the invariants.

model_checker.show_unproved
  • Type: boolean
  • Default: false
  • Environment: N/A

Whether or not to output all unproved targets.

Refer to the Solidity documentation for more information.

model_checker.solvers
  • Type: array of strings
  • Default: N/A
  • Environment: N/A

Sets the model checker solvers. Valid values are:

  • cvc4
  • eld: introduced in v0.8.18
  • smtlib2
  • z3

Refer to the Solidity documentation for more information.

model_checker.timeout
  • Type: number (milliseconds)
  • Default: N/A
  • Environment: N/A

Sets the timeout for the underlying model checker engines (in milliseconds).

model_checker.targets
  • Type: array of strings
  • Default: assert
  • Environment: N/A

Sets the model checker targets. Valid values are:

  • assert: Assertions
  • underflow: Arithmetic underflow
  • overflow: Arithmetic overflow
  • divByZero: Division by zero
  • constantCondition: Trivial conditions and unreachable code
  • popEmptyArray: Popping an empty array
  • outOfBounds: Out of bounds array/fixed bytes index access
  • default: All of the above (note: not the default for Forge)